Facebook Twitter Linked In Instagram Youtube

Loading Events

« All Events

  • This event has passed.

IFEES GEDC IUCEE Global Webinar: “Extreme Low-Cost Design to Prototype through ChipIgnite

October 6, 2021 @ 6:30 pm - 7:30 pm UTC+5.5

“Extreme Low-Cost Design to Prototype through ChipIgnite”



The webinar will describe the chipIgnite program and its value proposition to integrate fabrication into course work and to advance university research programs.

The chipIgnite program is a low-cost manufacturing including a full reference design for a carrier-chip that hosts the users design as well as a development board and firmware stack to simplify design validation and test. The program also includes an automated open source design flow for implementing projects that enables users to generate layouts for their digital projects from RTL.

Designers can also use commercial EDA tools to complete their projects.

This webinar will also showcase representative projects built on chipIgnite and the Efabless Open MPW Program (sponsored by Google) for open source designs.


Jeff DiCorpo is responsible for Business Development and Strategic Partnerships at Efabless. Prior to joining Efabless, Jeff was a Business Unit Director at Jabil Circuit supporting strategic development and new business creation initiatives. Jeff also spent over 20 years at Hewlett-Packard working in many roles including as a Distinguished Technologist within the HP StorageWorks Division.


October 6, 2021
6:30 pm - 7:30 pm UTC+5.5